NEODUR HE 2 - factory produced, ready to use cementitious dry mortars acc. to DIN 18557 and EN 13813, for the production of industrial floors.


For industrial floors to improve the surface hardness and the wear resistance of the floors being subjected to direct industrial stress. Indoors and outdoors.


NEODUR HE 2 is processed in dry installation method for the production of industrial screeds with integrated topping.
Precondition for a correct processing of NEODUR is the right initial consistency of the previously installed concrete or screed (Attention: not for airentrained concrete!). The installed concrete/screed must have set so far that the surface is just walkable.
As soon as this point of time is given, the concrete/screed is trowelled by means of disk float in order to concentrate cement paste on the surface as bond aid.
Apply NEODUR HE 2 uniformly in dry condition. Immediately after moisture penetration, work in NEODUR material by using disk float. A futher analogous installation procedure can be carried out as long as the NEODUR dry mortar still moistens.
Afterwards timely smoothing of the surface by using wing float is executed.



Differing temperatures may influence the setting and hardening procedure. The produced NEODUR industrial floor must be protected from too rapid drying out acc. to DIN 1045.
We recommend an after-treatment with KOROTEX or KOROSEAL, see technical data sheet.

Technical data

Raw material:

  • Granulometry
  • hardness acc. to Mohs
  • compressive strength after 28 days
  • wear




  • 0- 3 mm
  • 7 - 8
  • > 75 N / mm²
  • 8 cm³ / 50cm²

Material consumption:

  • 3 - 5 kg / m²

  • coloured NEODUR HE 2: 5 – 6 kg / m²


Korodur Westphal Hartbeton
Bochum Wattenscheid, Hohensteinstrasse 19
D-44866 Bochum

S25 kg special paper packaging

dry, like cement


6 months

Price request